![]() Navigate to Network Configuration and uncheck the check box for “Obtain IP from Server”.ğind the appropriate camera and right click it. ![]() Ěfter the program launches all the Foscam products found on the network should be listed (note: disable all virtual network drivers as they will interfere with proper operation of this program.).Meanwhile you can change the IP address to the numbers you want. Gateway: 192.168.1.1 (routers LAN IP, same as the computer’s gateway)ĭNS server: 8.8.8.8 (or the same as the gateway)Īdd the camera to the Foscam VMS, go to Setup->Network->IP to select No for "Obtain IP from DHCP" and save it. In this case the camera can be setup with the IP address of 192.168.1.100 (the last numbers of the address can be changed between a range of 2-253) In this example, the test router’s LAN IP address is 192.168.1.1.If the default IP address of the router was changed navigate to this article to find it.The Router’s LAN IP address is the gateway of the network normally this can be found on a label usually underneath or on the back of the router.Step 1: Find the Gateway IP Address (Router’s LAN IP) Overview: This article will introduce the procedure on how to set up a Foscam camera with a static IP Address.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |